DX Engineering of Tallmadge, Ohio is now the exclusive source for the Cycle 24 Galvanized Economy Saddle Clamps. The U-bolt clamps are an inexpensive solution for Amateur Radio antenna and tower projects.
Tallmadge, OH (PRWEB) March 04, 2014
DX Engineering of Tallmadge, Ohio is now the exclusive source for the Cycle 24 Galvanized Economy Saddle Clamps. The U-bolt clamps are an inexpensive solution for Amateur Radio antenna and tower projects. Their galvanized steel saddles and U-bolts will last for many years in outdoor environments.
The clamps feature serrated flange nuts for locking power. Clamps with 3/8 inch diameter U-bolts have unique flat surface at the top of the bolt for improved grip on the tubing. Clamps for 3 and 3.5 inch tubing have saddles that are closed and spot-welded on the ends before galvanizing. This increases clamp strength and longevity.
The Cycle 24 Galvanized Economy Saddle Clamps are available for 1.25, 1.5, 1.75, 2, 2.25, 2.5, 3 and 3.5 inch diameter tubing. Clamps with 5/16 inch diameter U-bolts are suitable for plates up to 3/16 inch thick when using saddles, and .250 inch thick plates if saddles are not used. Clamps with 3/8 inch diameter U-bolts will accommodate plates up to 9/16 inch thick.
See the Cycle 24 Galvanized Economy Saddle Clamps at DXEngineering.com.
DX Engineering
http://www.DXEngineering.com
1-800-777-0703
About DX Engineering
At DX Engineering, Amateur Radio is all we do. Our goal is simple: fulfill the needs of Ham radio enthusiasts with the best products and technical support. Whether it’s DXing, Contesting or just plain everyday operating, we strive to develop products that fill a specific need, products that are reliable, fully tested and represent the best value for your money. DX Engineering also carries the highest-quality products from brands that meet our exacting standards. Reported by PRWeb 3 hours ago.
Tallmadge, OH (PRWEB) March 04, 2014
DX Engineering of Tallmadge, Ohio is now the exclusive source for the Cycle 24 Galvanized Economy Saddle Clamps. The U-bolt clamps are an inexpensive solution for Amateur Radio antenna and tower projects. Their galvanized steel saddles and U-bolts will last for many years in outdoor environments.
The clamps feature serrated flange nuts for locking power. Clamps with 3/8 inch diameter U-bolts have unique flat surface at the top of the bolt for improved grip on the tubing. Clamps for 3 and 3.5 inch tubing have saddles that are closed and spot-welded on the ends before galvanizing. This increases clamp strength and longevity.
The Cycle 24 Galvanized Economy Saddle Clamps are available for 1.25, 1.5, 1.75, 2, 2.25, 2.5, 3 and 3.5 inch diameter tubing. Clamps with 5/16 inch diameter U-bolts are suitable for plates up to 3/16 inch thick when using saddles, and .250 inch thick plates if saddles are not used. Clamps with 3/8 inch diameter U-bolts will accommodate plates up to 9/16 inch thick.
See the Cycle 24 Galvanized Economy Saddle Clamps at DXEngineering.com.
DX Engineering
http://www.DXEngineering.com
1-800-777-0703
About DX Engineering
At DX Engineering, Amateur Radio is all we do. Our goal is simple: fulfill the needs of Ham radio enthusiasts with the best products and technical support. Whether it’s DXing, Contesting or just plain everyday operating, we strive to develop products that fill a specific need, products that are reliable, fully tested and represent the best value for your money. DX Engineering also carries the highest-quality products from brands that meet our exacting standards. Reported by PRWeb 3 hours ago.
